Jackal - Coin-Op Videogame Pinout

Return to the game record for Jackal

This game has been tagged as belonging to conversion class: JAMMA

There is a specific pin-out record on file for Jackal:

            JACKAL Konami 1986
------------------

            Solder Side            |             Parts Side
   ________________________________|___________________________________
                -5V            | A | 1 |             +12               
             Speaker           | B | 2 |           Speaker
           2P  Button 2        | C | 3 |          2P  Button 1       
           2P  Left            | D | 4 |          2P  Right
           1P  Start           | E | 5 |          2P  Start        
           1P  Button 1        | F | 6 |          2P  Up  
           1P  Button 2        | H | 7 |        Service Switch  
           1P  Right           | J | 8 |          1P  Left        
           1P  Up              | K | 9 |          2P  Down     
           Coin  (1)           | L | 10|          Coin  (2)  
           1P  Down            | M | 11|       Coin Counter  (1)
          1p  Button 3         | N | 12|       Coin Counter  (2)
          Video Green          | P | 13|        Video Blue
          Video Red            | R | 14|        Video Sync   
                               | S | 15|        2P  Button 3                 
              GND              | T | 16|             GND        
              GND              | U | 17|             GND       
              +5               | V | 18|             +5        



TECHNICAL INFORMATION________________________________________________________
    Adjusting Sound Level
    In stereo mode, use the volume control of each channels separately (L 
    and R)
    In monoaural mode, use the L-volume control to adjust the sound level.
    The R-volume control is inoperative in mono mode.


HOW TO CHANGE MONOAURAL/STEREO_______________________________________________
Note: Mono and stereo sound cannot operate simultaneously.
FOR MONO OUTPUT
Turn OFF the SW3 of the Dip Switch No.3
Connect pin 10 and pin L of the 56 pin edge connector to the loud speaker.
Use the L-volume control to adjust the sound level.
FOR STEREO OUTPUT
Turn ON the SW3 of the Dip Switch No.3
Use pins 1 and 2 of the 13 pin socket for the right hand channel.
Use pins 3 and 4 of the same socket for the left hand channel.
Turn R-volume control clockwise and the right hand channel becomes louder.
Turn L-volume control clockwise and the left hand channel becomes louder.
Note: Do not use pins 10 and L on the 56 pin edge connector.