Fire Trap Dip Switch Settings
Below are the specific dip-switch settings users have contributed for Fire Trap:
Dipswitch 1: (Located in the center of the PCB)
DIPSWITCH1 1 2 3 4 5 6 7 8
---------------------------------------------------------------------
COIN 1 COIN = 1 CREDIT OFF OFF OFF
VS 1 COIN = 2 CREDIT ON OFF OFF
CREDIT 1 COIN = 3 CREDIT OFF ON OFF
COIN 1 1 COIN = 4 CREDIT OFF OFF ON
1 COIN = 5 CREDIT ON ON OFF
---------------------------------------------------------------------
COIN 1 COIN = 1 CREDIT OFF OFF
VS 2 COIN = 1 CREDIT ON OFF
CREDIT 3 COIN = 1 CREDIT OFF ON
COIN 2 4 COIN = 1 CREDIT ON ON
---------------------------------------------------------------------
CABINET TABLE OFF
STYLE UPRIGHT ON
---------------------------------------------------------------------
ATTRACT MODE YES OFF
SOUND NO ON
---------------------------------------------------------------------
FLIP SCREEN NORMAL OFF
REVERSE ON
---------------------------------------------------------------------
Dipswitch 2: (Located on the bottom of the PCB)
DIPSWITCH2 1 2 3 4 5 6 7 8
---------------------------------------------------------------------
LEVEL OF NORMAL OFF OFF
DIFFICULTY EASY ON OFF
HARD OFF ON
VERY HARD ON ON
---------------------------------------------------------------------
NUMBER OF THREE OFF OFF
LIVES FOUR ON OFF
FIVE OFF ON
INFINATE ON ON
---------------------------------------------------------------------
BONUS 50K & EVERY 70K OFF OFF
LIVES 60K & EVERY 80K ON OFF
AWARDED 80K & EVERY 100K OFF ON
AT: 50K ONLY ON ON
---------------------------------------------------------------------
CONTINUE (BUY-IN) YES OFF
MODE NO ON
---------------------------------------------------------------------
TEST MODE NO OFF
YES ON
NOTE: Dip switch setting information is contributed by the community and although is believed to be correct (most of the time), has not been tested or verified.
Use this information at your own risk.
Official dip switch information may be available in the manual:
