Great 1000 Mile Rally Dip Switch Settings

Below are the specific dip-switch settings users have contributed for Great 1000 Mile Rally:

            DIP Switch on Rom Board   | SW1 | SW2 | SW3 | SW4 | SW5 | SW6 | SW7 | SW8 |
--------------------------|-----|-----|-----|-----|-----|-----|-----|-----|
Normal Mode               | OFF |     |     |     |     |     |     |     |
Settings Mode             | ON  |     |     |     |     |     |     |     |
--------------------------------------------------------------------------|
Normal Screen             |     | OFF |     |     |     |     |     |     |
Reverse Screen            |     | ON  |     |     |     |     |     |     |
--------------------------|-----|-----|-----|-----|-----|-----|-----|-----|
Upright 		  |     |     | OFF |     |     |     |     |     |
Table                     |     |     | ON  |     |     |     |     |     |
--------------------------|-----|-----|-----|-----|-----|-----|-----|-----|
Controllers             **|     |     |     | OFF |     |     |     |     |
                          |     |     |     | ON  |     |     |     |     |
--------------------------|-----|-----|-----|-----|-----|-----|-----|-----|
Controller: 1P side       |     |     |     |     | OFF |     |     |     |
Controller: both side     |     |     |     |     | ON  |     |     |     |
--------------------------|-----|-----|-----|-----|-----|-----|-----|-----|
A button = Brake         *|     |     |     |     |     | OFF |     |     |
Brake unused              |     |     |     |     |     | ON  |     |     |
--------------------------|-----|-----|-----|-----|-----|-----|-----|-----|
Anthem&Flag:              |     |     |     |     |     |     |     |     |
Follow memory settings    |     |     |     |     |     |     | OFF | OFF |
National Anthem, no flag  |     |     |     |     |     |     | ON  | OFF |
National Flag, no anthem  |     |     |     |     |     |     | OFF | ON  |
Neither used              |     |     |     |     |     |     | ON  | ON  |
--------------------------|-----|-----|-----|-----|-----|-----|-----|-----|

*: this setting is valid only when the joystick is used. When Dip Switch 6 is turned on, Brake Button is not used. Button A turns to be Accelerator Button.

**:
Controllers           | Dip on Rom Board | Dip on Daughter Board | NH connectors used |
----------------------|------------------|-----------------------|--------------------|
Joystick              | 4:OFF            |                       |                    |
----------------------|------------------|-----------------------|--------------------|
360o Wheel            | 4:ON ; 5:OFF     | 1:ON                  | 6 pins ; #3-#6     |
----------------------|------------------|-----------------------|--------------------|
270o Wheel            | 4:ON ; 5:ON      | 2:ON                  | 5 pins ; #1-#3     |   ----------------------|------------------|-----------------------|--------------------|

NH connectors on pcb | Pin at Wheel |
---------------------|--------------|
pin #3               | +5V          |
---------------------|--------------|
pin #4               | Clock ***    |
---------------------|--------------|
pin #5               | Up-Down      |
---------------------|--------------|
pin #6               | Ground       |
---------------------|--------------|

***: Clock pulse width = minimum 2ms. When Clock goes high from low:
- and up-down pulse is high -> Clockwise
- and up-down pulse is low  -> CCW