|
Museum of the Game® International Arcade Museum® - Killer List of Videogames® |
Sign In Register |
| Konami Classic Conversion Pinout Class |
Standard Konami Connector
Solder Side | Parts Side
_________________________|________________________
-5*** | A | 1 | +12
Speaker | B | 2 | Speaker
2P Button 2 | C | 3 | 2P Button 1
2P Left | D | 4 | 2P Right
1P Start | E | 5 | 2P Start
1P Button 1 | F | 6 | 2P Up
1P Button 2 | H | 7 | Service Switch
1P Right | J | 8 | 1P Left
1P Up | K | 9 | 2P Down
Coin (1) | L | 10| Coin (2)
1P Down | M | 11| Coin Counter (1)
| N | 12| Coin Counter (2)
Video Green | P | 13| Video Blue
Video Red | R | 14| Video Sync
| S | 15|
GND | T | 16| GND
GND | U | 17| GND
+5 | V | 18| +5
___________________________________________________
***note on -5V input: not all boards use a -5V input.
Frogger, Gyruss, and Time Pilot do.
Track and Field and Hyper Sports don't.
This is no big deal, EXCEPT that some boards may get "confused" if you send them -5 on the usual -5 pin (ie: HyperSports).
So if you plug one of these boards into a standard Konami cabinet and get strange things on the screen,
try disconnecting the -5 as your first step in troubleshooting:
Track & Field/Hyper Sports Connector
Solder Side | Parts Side
_________________________|________________________
NC | A | 1 | +12
Speaker | B | 2 | Speaker
4P Run 2 | C | 3 | 4P Jump
3P Run 2 | D | 4 | 3P Jump
1P Start | E | 5 | 2P Start
2P Jump | F | 6 | 3P Run 1
2P Run 2 | H | 7 | Service Switch
1P Jump | J | 8 | 1P Run 2
1P Run 1 | K | 9 | 4P Start
Coin (1) | L | 10| Coin (2)
3P Start | M | 11| Coin Counter (1)
2P Run 1 | N | 12| Coin Counter (2)
Video Green | P | 13| Video Blue
Video Red | R | 14| Video Sync
| S | 15| 4P Run 1
GND | T | 16| GND
GND | U | 17| GND
+5 | V | 18| +5
NOTE: Conversion class and pin-out data is contributed by the community and although is believed to be correct (most of the time), has not been tested or verified.
Use this information at your own risk.